Animatronic Dog

Animatronic dog waves its tail when you touch on its head.

Required Bricks:

1.Power brick with Battery and battery connector

2.Shadow brick

3.Motor brick with motor and wheel

Required materials:

1.Cardboard Box

2.Glaze paper

3.Glue

4.Double sided tape

5.9 hole strip

6.20mm Screw ,washer and nut

HOW TO MAKE IT?

Step 1: Take a cardboard box and cut out two sides,

Picture1

Step 2: Cut a small rectangle on the top of the box,

Picture2

Step 3: Put a washer inside 20 mm screw,

Picture3

Step 4: Put them inside a wheel,

Picture4

Step 5: Put a 9 hole strip into the screw,

Picture5

Step 6: Put a nut to the screw,

Picture6

Step 7: Connect the wheel to the motor,

Picture8

Step 8: Stick the motor inside the box,

Picture9

Step 9: Take a square box and stick on the rectangular box,

Picture11

Step 10: Draw an animatronic face,

Picture12

Step 11: Stick the face on the square box,

Picture13

Step 12: Make a tail ,

Picture14

Step 13: Stick the tail on 9 hole strip,

Picture15

Step 14: Stick shadow brick on the box,

Picture16

Step 15: Make the following connections,

lovely kitten